A host controller interface (HCI) is a register-level interface that enables a host controller for USB or IEEE 1394 hardware to communicate with a host controller driver in software. The driver software is typically provided with an operating system of a personal computer, but may also be implemented by application-specific devices such as a microcontroller.

Nec Pci To Usb Open Host Controller Driver
Nec Pci To Usb Open Host Controller Driver Updater
Nec Pci To Usb Open Host Controller Driver Controller
Download Driver Nec Pci To Usb Open Host Controller
Nec Pci To Usb Open Host Controller Driver Installer

2 Switch on your new usb hardware. 3 Right click on the My computer icon and push Properties tab then. Choose Hardware tab. Click on Device Manager button. 4 Find your NEC PCI to USB Enhanced Host Controller B0 device in the list and press double click on the usb device. Click Reinstall driver button. One of my onboard NEC USB PCI Hubs does not work(i have two installed, I have no problems with that one). The device manager says, The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element.To find a driver for this device, click Update Driver.' The drivers for 'NEC PCI to USB Open Host Controller' are from Microsoft and appear to be the latest version. I believe they are for the PCMCIA cards to be used at all. I have tried updating the Ricoh PCMCIA card drivers from Dell, but that doesn't seem to make a difference at all, although that device is also there and does not show any errors.

On the expansion card or motherboard controller, this involves much custom logic, with digital logic engines in the motherboard's controller chip, plus analog circuitry managing the high-speed differential signals. On the software side, it requires a device driver (called a Host Controller Driver, or HCD).

IEEE 1394[edit]

Open Host Controller Interface[edit]

Open Host Controller Interface (OHCI)^[1] is an open standard.

When applied to an IEEE 1394 (also known as FireWire; i.LINK or Lynx) card, OHCI means that the card supports a standard interface to the PC and can be used by the OHCI IEEE 1394 drivers that come with all modern operating systems. Because the card has a standard OHCI interface, the OS does not need to know in advance exactly who makes the card or how it works; it can safely assume that the card understands the set of well-defined commands that are defined in the standard protocol.

USB[edit]

Open Host Controller Interface[edit]

The OHCI standard for USB is similar to the OHCI standard for IEEE 1394, but supports USB 1.1 (full and low speeds) only; so as a result its register interface looks completely different. Compared with UHCI, it moves more intelligence into the controller, and thus is accordingly much more efficient; this was part of the motivation for defining it. If a computer provides non-x86 USB 1.1, or x86 USB 1.1 from a USB controller that is not made by Intel or VIA, it probably uses OHCI (e.g. OHCI is common on add-in PCI Cards based on an NEC chipset). It has many fewer intellectual property restrictions than UHCI.^[2] It only supports 32-bit memory addressing,^[3] so it requires an IOMMU or a computationally expensive bounce buffer to work with a 64-bit operating system^{[citation needed]}. OHCI interfaces to the rest of the computer only with memory-mapped I/O.^[3]

Universal Host Controller Interface[edit]

Universal Host Controller Interface (UHCI) is a proprietary interface created by Intel for USB 1.x (full and low speeds). It requires a license from Intel. A USB controller using UHCI does little in hardware and requires a software UHCI driver to do much of the work of managing the USB bus.^[2] It only supports 32-bit memory addressing,^[4] so it requires an IOMMU or a computationally expensive bounce buffer to work with a 64-bit operating system^{[citation needed]}. UHCI is configured with port-mapped I/O and memory-mapped I/O, and also requires memory-mapped I/O for status updates and for data buffers needed to hold data that needs to be sent or data that was received.^[4]

Enhanced Host Controller Interface[edit]

The Enhanced Host Controller Interface (EHCI)^[5] is a high-speed controller standard applicable to USB 2.0. UHCI- and OHCI-based systems, as existed previously, entailed greater complexity and costs than necessary. Consequently, the USB Implementers Forum (USB-IF) insisted^[when?] on a public specification for EHCI. Intel hosted EHCI conformance-testing and this helped to prevent the incursion of proprietary features.

Originally a PC providing high-speed ports had two controllers, one handling low- and full-speed devices and the second handling high-speed devices. Typically such a system had EHCI and either OHCI or UHCI drivers. The UHCI driver provides low- and full-speed interfaces for Intel or VIA chipsets' USB host controllers on the motherboard, or for any VIA discrete host controllers attached to the computer's expansion bus. The OHCI driver provides low- and full-speed functions for USB ports of all other motherboard chipset vendors' integrated USB host controllers or discrete host controllers attached to the computer's expansion bus. The EHCI driver provided high-speed functions for USB ports on the motherboard or on the discrete USB controller. More recent hardware routes all ports through an internal 'rate-matching' hub (RMH) that converts all traffic involving any directly-connected ports working at full-speed and low-speed between the high-speed traffic presented to the EHCI controller and the full-speed or low-speed traffic that the ports operating at those speeds expect, allowing the EHCI controller to handle these devices.

The EHCI software interface specification defines both 32-bit and 64-bit versions of its data structures,^[5] so it does not need a bounce buffer or IOMMU to work with a 64-bit operating system if a rate-matching hub is implemented to provide full-speed and low-speed connectivity instead of companion controllers using either the UHCI specification or OHCI specification, both of which are 32-bit only specifications.

Extensible Host Controller Interface[edit]

Extensible Host Controller Interface (xHCI) is the newest host controller standard that improves speed, power efficiency and virtualization over its predecessors. The goal was also to define a USB host controller to replace UHCI/OHCI/EHCI. It supports all USB device speeds (USB 3.1 SuperSpeed+, USB 3.0 SuperSpeed, USB 2.0 Low-, Full-, and High-speed, USB 1.1 Low- and Full-speed).

Virtual Host Controller Interface[edit]

Virtual Host Controller Interface (VHCI) refers to a virtual controller that may export virtual USB devices not backed by physical devices. For instance, on Linux, VHCI controllers are used to expose USB devices from other machines, attached using the USB/IP protocol.

References[edit]

^[1]
^ ^a^b'Linux USB FAQ'. August 27, 2007. Retrieved April 13, 2014.
^ ^a^b[2]
^ ^a^b'UHCI11D.DOC'(PDF). Ftp.netbsd.org. Retrieved 2017-01-10.
^ ^a^b'Enhanced Host Controlle

IEEE 1394[edit]

Open Host Controller Interface[edit]

USB[edit]

Open Host Controller Interface[edit]

Universal Host Controller Interface[edit]

Enhanced Host Controller Interface[edit]

Extensible Host Controller Interface[edit]

Virtual Host Controller Interface[edit]

See also[edit]

References[edit]

Nec Pci To Usb Open Host Controller Driver